Loop Plane

This paper airplane can fly a big loop-the-loop in the air and keep flying.

This is a decent glider that we have turned into an acrobatic vertical loop flying paper plane.

Easy Difficulty 14 folds acrobatic, decorative

Steps

Video Guide

Download & Print

Paper Airplane Folding Instructions

1. Place the sheet horizontally and fold it in half from left to right. Open the sheet back up.

2. Fold down the top left corner to the center, so that the crease lines up with the corner.

3. Repeat the previous step with the right side.

4. Next, fold down the top edge about half an inch.

5. Fold down the top edge three more times.

6. Now, fold the plane in half towards you.

7. Fold out one wing so the crease is parallel to the belly of the plane, which should be about 1 inch tall.

8. Repeat with the other wing.

9. Next, fold out both wing flaps.

10. Finally, cut two slits on the end of each wing, a little over 2 inches apart.

Final Paper Airplane Design

Use a bit of tape or a staple to keep the body from opening up. Then use the flaps that you cut to adjust the flight of your paper airplane to get it to fly a loop. If it doesn't loop, bend the flaps up. If the loop is too tight, bend the flaps down.

Watch a Video Tutorial

Download & Print This Design

Video Instructions

Printable Folding Instructions

These beautiful, easy to follow, paper airplane folding instructions can be downloaded and printed as many times as you want. Simply follow the printed instructions and fold along the indicated lines to make a perfect paper airplane, every time.